Aluminium dropout brackets to connect the lower attachment points of the Alizeti 300C & 300T to the lower attachment points on the dropouts on the bike frame near the centre of the rear wheel.
These brackets are designed to compensate for very wide or narrow distances between the rack attachment points on the dropout of the bike frame. Brackets will increase or decrease bracket spacing by 30 mm or 1-1/8".
These brackets allow the Alizeti 300 series to fit bicycle frames that have an outer width between the lower rack attachment points as narrow as 127 mm or 5 inches and as wide as 217 mm or 8.5 inches.
Offset brackets are not included with the e-bike Alizeti system.(See Technical Drawing)